• 12.1-inch colour display with 800 × 600 resolution
• Three working modes: Monitoring, Surgery and Diagnosis
• Multiple display modes: Standard Interface, Large Font, ECG Standard Full Display, OXY, Trend Table and BP Trend
• Built-in rechargeable lithium battery for up to 3 hours of continuous work
• VGA output for external display

• Lead mode: 5 leads (I, II, III, aVR, aVL, aVF, V)
• Gain: ×2.5 mm/mV, ×5.0 mm/mV, ×10 mm/mV, ×20 mm/mV
• Heart rate: 15–300 BPM adult; 15–350 BPM neonatal
• Resolution: 1 BPM; accuracy: ±1%
• Sensitivity: >200 µV peak-to-peak
• ST measurement range: -2.0 to +2.0 mV
• Sweep speed: 12.5, 25 and 50 mm/s
• Bandwidth: Diagnostic 0.05–130 Hz; Monitor 0.5–40 Hz; Surgery 1–20 Hz

• SpO₂ measuring range: 0–100%
• SpO₂ resolution: 1%
• SpO₂ accuracy: 70–100% ±2%
• Pulse rate: 20–250 BPM
• Pulse-rate resolution: 1 BPM; accuracy: ±3 BPM

• Method: oscillometry
• Measurement modes: Manual, Auto and STAT
• Units: mmHg, kPa
• Adult SYS 40–280, DIA 10–225, MEAN 20–240 mmHg
• Pediatric SYS 40–220, DIA 10–160, MEAN 20–170 mmHg
• Neonatal SYS 40–135, DIA 10–100, MEAN 20–110 mmHg
• Resolution: 1 mmHg; accuracy: ±5 mmHg

• RESP method: impedance between RA–LL or RA–LA
• RESP range: adult 10–120 BPM; neonatal/pediatric 7–150 BPM
• RESP resolution: 1 BPM; accuracy: ±2 BPM
• TEMP measurement/alarm range: 0–50°C
• TEMP resolution: 0.1°C; accuracy: ±0.1°C

• Recorder / printer
• Central monitoring system
• Dual IBP
• EtCO₂
• 12-lead ECG
• Nellcor SpO₂
• SunTech NIBP

Which parameters are standard?
The catalogue lists ECG, RESP, TEMP, NIBP, SpO₂ and PR as standard parameters.

Does it support optional advanced parameters?
Yes. The catalogue lists several optional parameters and system options; availability should be confirmed for the supplied configuration.

Before Ordering: Confirm the required configuration and optional modules before ordering.

Note: Specifications are subject to change at any time without prior notice.